uLektz logo
login images close

Verify Account

A Verification Code has been sent to you registered email address shown below. Please enter the code to verify your account. You may edit the email address, if it is incorrect

Resend Code

Note: Please check your Spam or Junk folder, in case you didn't receive the email with verification code.

Learning Path

Non-Linear: Random Order

About the Course

Course Description

This course provides students with concepts of Rigid bodies and deformable solids, Tension, Compression and Shear Stresses, Principal stresses and principal planes, Types of transverse loading on beams, Simply supported beams and over hanging beams and Torsion formulation stresses and deformation in circular and hollows shafts

Objectives 

1.Will familiarize about Deflection in shafts fixed at the both ends

2.Will demonstrate Deflection of helical springs, carriage springs

3.Will develop knowledge in Area moment method for computation of slopes and deflections in beams

Prerequisite

There is no particular prerequisite to learn Strength of Materials you will be able to do very well, if you have these basic skills: 

1. Good Analytics Skills

2. Good Understanding Skills

3. Good Communication Skills

.

Course Study Materials
Module 1: STRESS, STRAIN AND DEFORMATION OF SOLIDS
  • 1.1 Rigid bodies and deformable solids
  • 1.2 Tension, Compression and Shear Stresses
  • 1.3 Thermal stresses
  • 1.4 Elastic constants
  • 1.5 Principal stresses and principal planes
  • 1.6 Mohr’s circle of stress
  • STRESS, STRAIN AND DEFORMATION OF SOLIDS - ASSESSMENT 10 Questions
Module 2: TRANSVERSE LOADING ON BEAMS AND STRESSES IN BEAM
  • 2.1 Beams
  • 2.2 Types of transverse loading on beams
  • 2.3 Shear force and bending moment in beams
  • 2.4 Cantilevers
  • 2.5 Simply supported beams and over hanging beams
  • 2.6 Theory of simple bending
  • 2.7 Section modulus
  • 2.8 Bending stress distribution
  • 2.9 Flitched beams
  • 2.10 Shear stress distribution
  • TRANSVERSE LOADING ON BEAMS AND STRESSES IN - ASSESSMENT 10 Questions
Module 3: TORSION
  • 3.1 Torsion formulation stresses and deformation in circular and hollows shafts
  • 3.2 Torsional equation
  • 3.3 Torsional rigidity
  • 3.4 Stepped shafts
  • 3.5 Deflection in shafts fixed at the both ends
  • 3.6 Stresses in helical springs
  • 3.7 Deflection of helical springs, carriage springs
  • TORSION - ASSESSMENT 8 Questions
Module 4: DEFLECTION OF BEAMS
  • 4.1 Double integration method
  • 4.2 Macaulay’s method
  • 4.3 Area moment method for computation of slopes and deflections in beams
  • 4.4 Conjugate beam and strain energy
  • 4.5 Maxwell’s reciprocal theorems
  • DEFLECTION OF BEAMS - ASSESSMENT 6 Questions
Module 5: THIN CYLINDERS, SPHERES AND THICK CYLINDERS
  • 5.1 Stresses in thin cylindrical shell due to internal pressure circumferential and longitudinal stresses and deformation in thin and thick cylinders
  • 5.2 Thin cylinder
  • 5.3 Thick cylinder
  • 5.4 Spherical shells subjected to internal pressure
  • 5.5 Deformation in spherical shells
  • 5.6 Lame’s theorem
  • THIN CYLINDERS, SPHERES AND THICK CYLINDERS - ASSESSMENT 6 Questions
FINAL ASSESSMENT
  • FINAL ASSESSMENT 20 Questions

The certificate issued for the Course will have the student's Name, Photograph, Course Title, Certificate number, Date of course completion and the name(s) and logo(s) of the Certifying Bodies. Only the e-certificate will be made available. No Hard copies. The certificates issued by uLektz Learning Solutions Pvt. Ltd. can be e-verifiable at www.ulektzskills.com/verify.

  • Students are required to take online assessments with eProctoring.
  • Students will be assessed both at the end of each module and at the end of the Course.
  • Students scoring a minimum of 50% in the assessments are considered for Certifications
certificate
...
₹299
Features:
  • 90 hours Learning Content
  • 100% online Courses
  • English Language
  • Certifications

Course

Registration opens on 04-02-2019

Course

Your registration details are under review. It should take about 1 to 2 working days. Once approved you will be notified by email and then you should be able to access the course.

Course Approved

Approval Pending - In-Progress

Course access details will be shared within 24 hours.
For help contact: support@ulektz.com

Course Enrollment

Course

Course starts on 11-05-2021

Course

You have completed 6 hours of learning for 06-12-2021. You can continue learning starting 07-12-2021.

Course

This course can only be taken in sequential order.

Course

You have completed the course. You will be notified by email once the certificate is generated.

Course

Are you sure want to enroll this course?.

Course

Course

S.no Date Title Reason

Result Summary

Strength of Materials.