uLektz logo
login images close

Verify Account

A Verification Code has been sent to you registered email address shown below. Please enter the code to verify your account. You may edit the email address, if it is incorrect

Resend Code

Note: Please check your Spam or Junk folder, in case you didn't receive the email with verification code.

Learning Path

Non-Linear: Random Order

About the Course

Course Description

This course provides students with concepts of Mechanics of chip formation, Cutting tools– nomenclature, Orthogonal metal cutting, Cutting tool materials, Specification of capacity of lathe with a inline diagram, Self Centering Three-Jaw Chuck and Hydraulic drive mechanism of horizontal shaper

Objectives 

1.Will familiarize about Sketch of a twist drill and its parameters

2.Will demonstrate Difference between up milling and down milling

3.Will develop knowledge in Climb Milling and its advantages

Prerequisite

There is no particular prerequisite to learn Manufacturing Technology - II you will be able to do very well, if you have these basic skills: 

1. Good Analytics Skills

2. Good Understanding Skills

3. Good Communication Skills

.

Course Study Materials
Module 1: THEORY OF METAL CUTTING
  • 1.1 Mechanics of chip formation
  • 1.2 Single point cutting tool
  • 1.3 Types of chip
  • 1.4 Cutting tools– nomenclature
  • 1.5 Orthogonal metal cutting
  • 1.6 Cutting tool materials
  • 1.7 Tool wear
  • 1.8 Tool life
  • 1.9 Cutting fluids
  • THEORY OF METAL CUTTING - ASSESSMENT 10 Questions
Module 2: TURNING MACHINES
  • 2.1 Center lathe
  • 2.2 Specification of capacity of lathe with a inline diagram
  • 2.3 Taper turning methods
  • 2.4 Thread cutting methods
  • 2.5 Self Centering Three-Jaw Chuck
  • 2.6 Capstan and turret lathes
  • 2.7 Bar Feed Mechanism
  • 2.8 Automatic lathes
  • 2.9 Automatic screw type
  • TURNING MACHINES - ASSESSMENT 8 Questions
Module 3: SHAPER, MILLING AND GEAR CUTTING MACHINES
  • 3.1 Shaper
  • 3.2 Hydraulic drive mechanism of horizontal shaper
  • 3.3 Types of operation
  • 3.4 Sketch of a twist drill and its parameters
  • 3.5 Milling operations
  • 3.6 Difference between up milling and down milling
  • 3.7 Climb Milling and its advantages
  • 3.8 Types of milling cutter
  • 3.9 Gear Cutting
  • 3.10 Hobbing
  • 3.11 Finishing of gears
  • SHAPER, MILLING AND GEAR CUTTING MACHINES - ASSESSMENT 10 Questions
Module 4: ABRASIVE PROCESS AND BROACHING
  • 4.1 Abrasive processes
  • 4.2 Finishing processes
  • 4.3 Grinding wheel – specifications and selection
  • 4.4 Types of grinding process
  • 4.5 Surface grinding
  • 4.6 Broaching Machine
  • ABRASIVE PROCESS AND BROACHING - ASSESSMENT 7 Questions
Module 5: CNC MACHINING
  • 5.1 Numerical Control (NC) machine tools
  • 5.2 CNC types, constructional details, special features
  • 5.3 Machining center
  • 5.4 Part programming fundamentals CNC
  • 5.5 Manual part programming
  • CNC MACHINING - ASSESSMENT 7 Questions
FINAL ASSESSMENT
  • FINAL ASSESSMENT 20 Questions

The certificate issued for the Course will have the student's Name, Photograph, Course Title, Certificate number, Date of course completion and the name(s) and logo(s) of the Certifying Bodies. Only the e-certificate will be made available. No Hard copies. The certificates issued by uLektz Learning Solutions Pvt. Ltd. can be e-verifiable at www.ulektzskills.com/verify.

  • Students are required to take online assessments with eProctoring.
  • Students will be assessed both at the end of each module and at the end of the Course.
  • Students scoring a minimum of 50% in the assessments are considered for Certifications
certificate
...
₹299
Features:
  • 90 hours Learning Content
  • 100% online Courses
  • English Language
  • Certifications

Course

Registration opens on 04-02-2019

Course

Your registration details are under review. It should take about 1 to 2 working days. Once approved you will be notified by email and then you should be able to access the course.

Course Approved

Approval Pending - In-Progress

Course access details will be shared within 24 hours.
For help contact: support@ulektz.com

Course Enrollment

Course

Course starts on 11-05-2021

Course

You have completed 6 hours of learning for 06-12-2021. You can continue learning starting 07-12-2021.

Course

This course can only be taken in sequential order.

Course

You have completed the course. You will be notified by email once the certificate is generated.

Course

Are you sure want to enroll this course?.

Course

Course

S.no Date Title Reason

Result Summary

Manufacturing Technology - II